Foot Pedal (Accessory); Operation Modes - Danfoss Control C.2 Operator's Manual

3.2

Foot pedal (accessory)

3.3

Operation modes

(1) LAN socket to connect a network. Regarding options for connec-
tion to a network, please contact UNIFLEX.
(2) 2 x USB sockets (for the use of memory media/ accessories cer-
tified by UNIFLEX)
(1) Close machine pedal
(2) Open machine pedal
WARNING!
Risk by fatiguing posture!
A static posture may result in work-related musculosceletal disor-
ders and reduce productivity.
•
Make sure that operators have sufficient periods of relief and
recreation.
The control provides for the following operation modes:
•
Manual operation
is activated in the control. The forming process is controlled
manually via the buttons on the control panel or external but-
tons, e.g. the dual foot switch:
–
Buttons Close tool
–
Dual foot switch
The right foot switch is used to close the tool and activate
and Open tool .