Instructions For Action; Start-Up Control - Danfoss Control C.2 Operator's Manual

8

Instructions for action

8.1

Start-up control

1. Start the machine.
The control operating system is started.
2. If the control CONTROL C.2 does not start automatically, double
click on Uniflex (4) in order to switch to the CONTROL C.2.
The Uniflex logo is shown before the first machine settings
screen opens (database).
3. Set requested language (1).
4. Proceed to next screen.
5. Set requested units (2).
6. Proceed to next screen.
7. Select the appropriate control version by touching an *.xml-file
(3).
8. Confirm entries.
The Uniflex logo is shown before the control start screen opens.