Related Manuals for Danfoss ADAP-KOOL AK-SM 800
Summary of Contents for Danfoss ADAP-KOOL AK-SM 800
- Page 1 Service Guide Setup for HGM Leak Detector with Alarm and Strobe AK-SM 800 ADAP-KOOL® Refrigeration Control System...
- Page 2 2. From the Control tab, set the number of leak detectors as the desired number between 1 and 50. 3. Navigate to the Leak tab. 4. Set the Leak Type to HGM as desired 2 | AX279127907281en-000101 © Danfoss | ADAP-KOOL® | 2018.08...
- Page 3 Choose the Refrigerant, Full scale value, and enable each zone sensor that will be used. 7. Navigate to the addresses tab. 8. Go to the Sensors tab and address as desired. AX279127907281en-000101 | 3 © Danfoss | ADAP-KOOL® | 2018.08...
- Page 4 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.