Table of Contents
Advertisement
3.12.5 Setting Pop-up Positions
When you select Random Position of Camera, you can decide the positions for pop-up
cameras.
◼ Fixed Position of Camera: The cameras pop up in their assigned positions. To assign
positions, select Screen Division. Then drag and drop the cameras number to the
desired potions on the divisions.
◼ Random Position of Camera: The positions of pop-up cameras are based on the
sequence order of triggers. There are two modes for this position:
1. Cascade Mode: This mode can avoid the same cameras popping up on different
monitors. This is suggested to be used when multiple monitors are placed close to
each other.
Example:
Camera 1, Camera 2, Camera 3, Camera 4 and Camera 5 are assigned for pop-up
alert on both Monitor 1 and Monitor 2. Monitor 1 is set at 4 screen divisions. When the
five cameras are triggered at same time, the first 4 cameras show up on Monitor 1
th
and the 5
on Monitor 2.
Monitor 1
2. Parallel Mode: This mode allows the same cameras simultaneously pop up on
different monitors. This is suggested to be used when multiple monitors are placed in
separate rooms.
Example:
Camera 1, Camera 2, Camera 3 and Camera 4 are assigned for pop-up alert on both
Monitor 1 and Monitor 2. When the four cameras are triggered at the same time, they
will show up simultaneously on both Monitor 1 and Monitor 2.
1
3
Monitor 1
Monitor 2
2
4
48
1
2
3
4
Monitor 2
Advertisement
Table of Contents
