Table of Contents
Advertisement
The GV-Hot Swap Surveillance System V6 will run a series of self-tests, and later series of
messages may be displayed as the various hardware and software subsystems are activated.
After this is finished,
⚫
GV-Hot Swap NVR System pops up GV-IP Device Utility to detect IP devices under the
same LAN. To add an IP camera to the system, see Adding IP Video Devices, Chapter 5,
in the Quick Start Guide.
⚫
GV-Hot Swap VMS System pops up the Automatic Setup dialog box. To add an IP
camera to the system, see Adding IP Video Devices to GV-VMS, Chapter 6, in the Quick
Start Guide.
⚫
GV-Hot Swap Recording Server System pops up login Web interface. See Chapter 7 in
the Quick Start Guide.
Note: The series of self-tests will take around 20 seconds to 2 minutes, depending on the
number of installed hard drives.
14
Advertisement
Table of Contents
