Table of Contents
Advertisement
To create a storage group for GV-Hot Swap VMS System,
1. On the GV-VMS, open the Recording dialog box (Home
Configure
> System Configure > Record Setting).
2. Select a camera and click
3. To create a storage group, click the Add button
group is created by default.
4. To assign hard drives to a storage group, click the Add button
folders to be assigned to the storage group.
5. Click OK to apply the settings. The Record Setting dialog box appears.
6. To assign cameras to a storage group, select the cameras and select a storage group
from the Storage drop-down list. Note one camera can only be added to one storage
group.
next to Add Log Location to open the following dialog box.
Figure 3-20
D:\Record\
E:\Record\
F:\Record\
G:\Record\
H:\Record\
Figure 3-21
32
> Toolbar
in the top-left corner. The first storage
above Path and select
>
Advertisement
Table of Contents
