Setting Up The Video Storage Location - GeoVision V6 User Manual

Getting Started
3
3.7

Setting Up the Video Storage Location

To achieve stable recording performance, you need to divide your hard disks into 4 / 8 storage
groups and each group is assigned with an equal number of cameras.
Note: Be sure to follow the hard drive installation of 20 / 12 / 8-bay models as below. See 3.5
Formatting the Hard Drive for details.
8-Bay Models
For the users of GV-Hot Swap NVR / VMS System, create 4 storage groups and assign the
specified hard drives and camera channels in the storage group according to the tables below.
Take the 4U 20-bay 64-channel model as an example, you should assign hard drive D, E, F,
G, H to Storage Group 1, and then assign camera 01-16 to be recorded in Storage Group 1.
Storage Group 1 Storage Group 2 Storage Group 3 Storage Group 4
4U 20-bay
GV-Hot Swap
NVR / VMS
System
64-channel Camera 01-16
32-channel Camera 01-08
20-Bay Models
Figure 3-19
D I
E J
F K
G L
H M
Camera 17-32
Camera 09-16
29
12-Bay Models
N
O
P
Q
R
Camera 33-48 Camera 49-64
Camera 17-24 Camera 25-32
S
T
U
V
W