Table of Contents
Advertisement
Getting Started
3
The Audio Alarm
When the audio alarm of the Redundant Power Supply rings, check:
1. If the modules are pushed all the way to the end, or
2. The power input is properly connected to the power supply.
If the modules are properly installed but the audio alarm continues to ring, the modules may
be damaged and you may need to contact your distributor for a replacement. To stop the
ringing alarm sound, press the alarm button. To remove the module from the system, push the
release latch and pull out the entire module with the handle at the same time.
4U Models
Release Latch
Alarm Button
Handle
Figure 3-46
2U Models
Alarm Button
Release Latch
Handle
Figure 3-47
55
Advertisement
Table of Contents
