Table of Contents
Advertisement
3.2 Setting the Network
To configure the network settings for the GV-IP Decoder Box, on the main menu, select
and press OK. This window appears.
DHCP: Select Yes to enable the DHCP function; No to disable the function.
IP Address: Enter the IP address of the GV-IP Decoder Box.
Mask: Enter the mask address of the GV-IP Decoder Box.
DNS: Enter the DNS address of the GV-IP Decoder Box.
Gateway: Enter the gateway address of the GV-IP Decoder Box.
MAC: Shows the MAC address of the GV-IP Decoder Box.
Connected IP: Shows the current IP address at use.
Figure 3-3
3
System Setup
33
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-IP Decoder Box and is the answer not in the manual?
Questions and answers