Table of Contents
Advertisement
4.5. DISPLAY DESCRIPTION
Generator: phase voltage L1, frequency F
Load percentage
Fuel level, total running time
Parameter setting
Remark:
When active power is "---", which means active power is negative, please check voltage and current
1)
connection.
2)
Pressure, temperature and liquid level sensors are not displayed, which means not used; when
displayed "OFF" means sensors are open circuit.
3)
When total running time are lower than 20000 hours, value before the decimal point is means running
hours and value after the decimal point is means 1/10 hour.
HGM1790N Genset Controller
HGM1790N GENSET CONTROLLER USER MANUAL
Load: active power, current
Oil pressure, temperature
Battery voltage, generator speed
2017-10-09
Version1.1
Page 9 of 27
Advertisement
Table of Contents
