Common Settings; Data Buffer Mode - Opticon L-46X User Manual

5.4

Common Settings

This section describes the settings common to all interfaces.
5.4.1

Data Buffer Mode

This option allows you to specify whether to read an object during data output.
When buffer mode is enabled, the scanner can perform other operations such as barcode scanning
while outputting decoded data. However, the reading performance may degrade during the data
output. When buffer mode is disabled, the scanner stops other operations until the completion of
decoded data output.
The following menu codes / commands are provided for the data buffer mode setting.
Item
Data buffer mode
* When handshaking is configured, this setting is ignored and Data Buffer Mode is disabled.
L-46X User's Manual
1st
Command
[D80 Data buffer disable
[D81 Data buffer enable *
Description
Chapter-5
Interface
Default

52