2.7
Operation Transition
Following are the operation status transition of the scanner.
2.7.1
Operation Transition Diagram
Pull trigger
Send trigger command
Status
Read
Standby
Auto trigger
Auto trigger sleep
Operation current transition (USB-HID)
Status
Reading
Auto trigger standby
Standby
L-46X User's Manual
1st
Power-OFF
Power applied
Remove from the stand
Standby
or
Reading complete
or
Complete trigger
Read
Acquiring image and reading is in progress with the warm white LED and
green aiming LED on.
Can start reading by serial command or pulling trigger.
Detecting target by image. Status LED turns on in light blue and warm white
LED slightly on.
When no detection continues for 5 seconds (default setting) while in the auto
trigger mode, scanner shift to auto trigger sleep which detects with the warm
white LED turned off.
Typ.
Unit
340
mA
160
mA
55
mA
Auto trigger
No detection for
the set time
(Default: 5 seconds)
Auto trigger
Attach to the stand
Description
Chapter-2
Before Using
sleep
Detect
target
11