5.1.4
Data Output Speed (USB-HID)
Adjust data output speed in USB-HID. Selecting shorter time will make output faster, but depend on
host system, outputting all character may fail.
To enable this setting, reboot is necessary after saving the setting.
Item
USB-HID
Data transfer interval
Setting example)
Set the transmit interval to 1 ms (fastest).
Command: [E9MQ1
Set the transmit interval to 10 ms.
Command: [E9MQ1Q0
5.1.5
Inter Character Delay (USB-HID)
The inter character delay introduces a configurable delay after each transmitted character.
This may be used if the host does not support flow control and is not capable of handling the received
data at full speed.
Item
Inter character delay
L-46X User's Manual
1st
Command
[E9M
Qa
Qb
Command
LA
LB
LC
LD
LE
LF
LG
LH
LI
LJ
LK
Command description
Set transfer interval
Interval: (10a+b) ms「Unit」
Description
No delay
Delay = 1
Delay = 2
Delay = 3
Delay = 4
Delay = 5
Delay = 6
Delay = 7
Delay = 8
Delay = 9
Delay = 10
Chapter-5
Interface
Default
(Effective range)
4 ms
1-16 ms
Default
37