Central Reading - Opticon L-46X User Manual

8.1.3

Central Reading

This function can be used to read a specific target code when multiple codes are closely positioned.
Only the code in the central portion of an image will be read, as shown below.
Item
Central reading
Examples of readable positions in central reading setting
Examples of unreadable positions in central reading setting
* When several codes are tightly packed, it is recommended to use the Trigger Repeat (See: 8.2.1) function to
Improve reading performance.
L-46X User's Manual
1st
Command
Enable central reading;
[D00
read only a code at the center of aiming LED
[D0Z Disable central reading; read within entire image
Description
Chapter-8
Read Options
Default

100