Attaching Cable - Opticon L-46X User Manual

2.9.2

Attaching Cable

Disconnect the USB connector or AC adapter cable from the host, and follow the steps below to attach.
When changing interface, interface setting change is also required. Refer 3.2.4 for interface switching
setting/menu.
Step1
Confirm the connector insert direction of the cable unit and
insert into grip end.
Step3
Rotate the case removing stopper for clockwise
90°.
L-46X User's Manual
1st
Grip end
Cable Unit
Case removing stopper
Step4
After rotation, case removing stopper dent mark position is
as above drawing.
Step2
Match the direction of dent mark on the
case removing stopper and grip end, and
insert.
Chapter-2
Before Using
15