Table of Contents
Advertisement
1. GETTING STARTED
To help ensure years of trouble free operation, please read through the following chapter for information to help guide
you through the initial installation procedures of your new relay.
CAUTION: THE OPERATOR OF THIS INSTRUMENT IS ADVISED THAT IF THE EQUIPMENT IS USED IN A
MANNER NOT SPECIFIED IN THIS MANUAL, THE PROTECTION PROVIDED BY THE EQUIPMENT MAY BE
INSTALLATION MUST BE ACCORDING TO THE NATIONAL ELECTRIC
1.1
INSPECTION CHECKLIST
•
Open the relay packaging and inspect the relay for physical damage.
•
View the faceplate relay model number and verify that the relay is the correct model ordered.
•
Ensure that the mounting screws have been included with the relay.
•
For product information, instruction manual updates, and the latest software updates, please visit the GE Power
Management Home Page (www.geindustrial.com/pm).
Note: If there is any physical damage noticed on the relay, or any of the contents listed are missing, please
contact GE Power Management immediately.
GE Power Management contact information:
GEK-106273L
GETTING STARTED
IMPAIRED
CODE OF THE APPROPRIATE COUNTRY
GENERAL ELECTRIC POWER MANAGEMENT S.A
Avda. Pinoa, 10
48170 Zamudio, Vizcaya (Spain)
Phone: +34 94-485 88 00, Fax: +34 94-485 88 45
E-mail: gemultilin.euro@indsys.ge.com
GENERAL ELECTRIC MULTILIN
215, Anderson Avenue
L6E 1B3 Markham, ON (CANADA)
Phone: +1 905 294 6222, Fax: +1 905 201 2098
E-mail: gemultilin@indsys.ge.com
MIF Digital Feeder Protection
1-1
Advertisement
Table of Contents
