Table of Contents
Advertisement
14.3
SAMPLES OF SETTINGS FOR PARTICULAR MODEMS
In the following sections, we will detail some communications parameters, already tested for the following modems.
Initiation commands for the modem on the PC side:
We will add the following commands to the default configuration:
&An
Enable/disable the ARQ result codes Disable the ARQ result codes
&Hn
Sets the flux control for the data
transfer (TD).
&In
Sets the software flux control for the
data reception (RD).
&Kn
Enable/Disable data compression
&Mn
Sets the error control (ARQ) for 1200
bps and higher.
&Rn
Configures the hardware flux control
for data reception (DR) and transfer
request (RTS)
S15
Record with bit representation.
S32
Record with bit representation.
Initiation commands for the modem on the RELAY side
The following options must be added to the default configuration:
&An
Enable/disable the ARQ result codes ARQ result codes are disabled
&Dn
Control the DTR operations
&Hn
Sets the flux control for the data
transfer (TD).
&In
Sets the software flux control for the
data reception (RD).
&Kn
Enable/Disable data compression
&Mn
Sets the error control (ARQ) for 1200
bps and higher.
&Rn
Configures the hardware flux control
for data reception (DR) and transfer
request (RTS)
S0
Sets the number of rings necessary
for answering in automatic answering
mode
S15
Record with bit representation.
S32
Record with bit representation.
GEK-106273L
ANNEX 4 MODEM CONNECTION
14.3.1.
Flux control disabled
Software flux control disabled.
Data compression disabled
Normal mode, error control disabled
Modem ignores RTS.
Disable ARQ/MNP for V.32/V.32bis.
Disable V.34. modulation
About DTR control.
Flux control disabled
Software flux control disabled.
Data compression disabled
Normal mode, error control disabled
Modem ignores RTS.
The modem will answer to the first ring. S0=1
Disable ARQ/MNP for V.32/V.32bis.
Disable V.34. modulation
MIF Digital Feeder Protection
SPORTSTER FLASH X2 MODEM (HAYES)
&A0
&H0
&I0
&K0
&M0
&R1
S15=4
S32=8
&A0
&D0
&H0
&I0
&K0
&M0
&R1
S15=4
S32=8
14-3
Advertisement
Table of Contents
