5.3. ADVANCED SETTINGS
5 SETTINGS
PROPERTIES
From the File – Properties option, the program will show a screen including the relay model information, firmware
version, etc., as shown on figure 4-3.
FIGURE 4-3.
GET INFO FROM RELAY
The File – Get info from relay option enables the user to save the relay settings in a file on the hard disk of the
computer. This file can later be opened offline to review and modify settings, and send them again to the relay after
the modifications.
SEND INFO TO RELAY
The File – Get info from relay option enables to send to the relay a settings file stored on the hard disk of the
computer.
PRINT SETUP
The File – Print Setup option enables the user to configure the print setup for the settings file as shown in figure 4-4.
FIGURE 4-4. PRINTER SETUP
4-4
MIF Digital Feeder Protection
GEK-106273L