Table of Contents
Advertisement
The mnemonics in figure 8.12 stand for:
ADVANCED SETTINGS
GENERAL ADVANCED
F51P T2
F51NT2
F50PH T2
F50PL T2
F50NH T2
F50NL T2
F49 T2
TAB
-
Range:
TRIP MIN TIME
-
Range:
CNF
The other setting headings at the same level than General Advanced Settings are F51P T2, F51N T2, F50PH
T2, F05PL T2, F50NH T2, F50NL T2 and F49 T2, where T2 means TABLE 2. The use of the keypad and display for
all these functions is identical to the previously described for the corresponding function in the table number one.
8-20
KEYPAD AND DISPLAY
Advanced Settings Menu.
General Advanced Settings.
Phase Time Overcurrent Function (51P) – Table 2.
Ground Time Overcurrent Function (51N) – Table 2.
Phase Instantaneous Overcurrent High Set. Function (50PH) - Table 2.
Phase Instantaneous Overcurrent Low Set. Function (50PL) - Table 2.
Ground Instantaneous Overcurrent High Set. Function (50NH) - Table 2.
Ground Instantaneous Overcurrent Low Set. Function (50NL) - Table 2.
Thermal Image Function (49) - Table 2.
Active Table.
1
Table 1.
2
Table 2.
Minimum time that the output contact is closed.
50 to 300 ms
CONFIRM
OK
Validate the value selected.
MIF Digital Feeder Protection
Step: 1 ms.
GEK-106273L
Advertisement
Table of Contents
