GE GEK-106273L Instruction Manual page 124

The mnemonics in figure 8.13 stand for:
OPERATIONS
RESET LEDS
RST THERMAL
ACT TABLE1
ACT TABLE2
OPEN BREAKER
CLOSE BREAKER
RST OPENINGS
RST I2T
CNF
Once the operation to be performed has been found, using the "+" and "-" keys, press Enter to select it, and then
press Enter again to confirm that the command must be executed. Then the text OK will appear in the display.
GEK-106273L
KEYPAD AND DISPLAY
Commands or Operations to be performed from the relay.
Reset Command for the faceplate Target LEDs and latching of auxiliary contacts in
OPTION 1 and OPTION 2 models.
Reset Command for the Thermal Image Unit.
Set Table 1 as the Active Table.
Set Table 2 as the Active Table.
Breaker opening.
Breaker closing.
Reset openings (OPTION 2 models).
Reset of accumulated value of I
CONFIRM OK
MIF Digital Feeder Protection
2
t counter (OPTION 2 models).
Confirm that the command must be executed.
8-23