GE GEK-106273L Instruction Manual page 75

5.3. ADVANCED SETTINGS 5 SETTINGS
1
Once the connection is established, when the user accesses any Setpoint or Operations, or Actual – Event Recorder menu entries for
the first time, the program will ask the relay password. The following window will appear:
FIGURE 4-21. COMMUNICATION CONTROL – COMMUNICATING
4.6.1.3. COMMUNICATION OPTIMIZATION
COMMUNICATIONS OPTIMIZATION box allows the user to enter values to control device response to communication attempts.
Changing these parameters can improve communication, although it is recommended not to make changes to the default values if it is
not required.
FIGURE 4-22. COMMUNICATION OPTIMIZATION
1
i.e., the first time a writing operation is performed against the relay during the current communication
4-18 MIF Digital Feeder Protection GEK-106273L