Table of Contents
Advertisement
PRODUCT DESCRIPTION
Communications Ports
The faceplate RS232 and the rear RS485 port provides an easy to use Human interface. All serial ports use the
Modbus® RTU protocol and may be connected to system computers with baud rates from 300 to 19200 bps. Up to
32 MIF relays can be connected (daisy-chained) on the same communication circuit. Each relay must be assigned a
different Modbus Address (using a setting) if multiple relays are connected on the same circuit.
Software
®
MIF units are supply together with ENERVISTA MII SETUP software, a Windows
based software allowing
communication with the relay for data view and retrieval, as well as oscillography, I/O configuration and logical
configuration (in models where these features are available).
2-14
MIF Digital Feeder Protection
GEK-106273L
Advertisement
Table of Contents
