3.5 Set Up Setting
3.5.1 Communication channel (CH) setting
Before analytical operation, communication channel (CH) and
liquid crystal display contrast (LCD CONTRAST) need to be set.
• This setting is not required every time. When unnecessary,
skip this setting.
• The default value or currently set value is indicated before
your input.
Set a communication channel via the e-Line in the following way.
(1)
Turn on the power switch with the
(2)
The following display will be presented.
<Setup initial screen>
SETUP: DETECT
CH1
Press the ENT key.
(3)
The following display will be presented.
<Setup items selecting screen>
SETUP ITEMS (DETECTOR=1, THERMO CELL=2
1
CONTRAST=3, EXCHANGE STANDARD=4)
Select DETECTOR.
Press numeric key 1 and then the ENT key.
(4)
The following display will be presented.
<Channel selecting screen>
DETECTOR (CH1=1, CH2=2)
1
3 - 46
SET UP
UTLTY
THERMO
CONTRAST
NO USE
4
key held down.
S. NO.
02AB-111