• GUI Controller
• Fastening between Component Units
The GUI controller is a touch panel type operation panel.
This operation panel alone enables the user to control the
respective modules.
For operation, refer to the instruction manual of the GUI
controller.
Prevention of Instrument Tipover
Personal injury could be incurred if the instrument tips
over. When installing the instrument, provide a proper
means for fastening between module units.
On the rear of each module unit, a cabling cover is attached.
The adjacent models are fastened with each other by attaching
the fastening plate between the cabling covers.
Appended Fig. 1-11 Attachment of Cabling Cover
APPENDIX 1 - 15
CAUTION
Fastening plate
Fastening screw