Plunger Wash Pump Setting; Error Out Signal Setting - Hitachi CHROMASTER 5160 Instruction Manual

3.2.10 Plunger Wash Pump Setting

3.2.11 Error Out Signal Setting

The plunger wash pump (option) is set.
This operation is enabled only when the plunger wash pump is
connected.
Monitor screen
SET UP
UTLTY
UTLITY (CONDITION=1, UNIT=2,
6 EVENT=4, LINK=5, P.WASH=6, OTHERS=7)
Select P.WASH
6 ENT
WASH TIME (0 – 300) sec
0
Enter wash time
ENT
Monitor screen
Error out signal will be output when a pump error is detected.
Monitor screen
SET UP
UTLTY
UTLITY (CONDITION=1, UNIT=2,
7 EVENT=4, LINK=5, P.WASH=6, OTHERS=7)
Select OTHERS
7 ENT
OTHERS (ERROR OUT=1,
1
Select ERROR OUT
1 ENT
ERROR OUT SIGNAL
1
Select ENABLE
1 ENT
Monitor screen
3 - 38
FLUSH=3
FLUSH=3
LEAK SENSOR=2
(DISABLE=0, ENABLE=1)