Motor Coolant Connections; Transmission Initial Set-Up And Requirements; Transmission Oil/Fluid; Figure 2.5: Direction Of Rotation In Forward - Danfoss ED-DT318B Installation And Operation Manual

Drive train systems with traction control converter and machine with 2 speed transmission

Table of Contents

Installation and Operation Guide

ED-DT318B

Drive Train Systems with Traction Control, Inverter/Controller, and Motor with 2 Speed Transmission

•

Looking into the output flange, the direction of rotation of the transmission in forward is CCW. The

transmission's lubrication pump was designed for this direction of rotation; therefore, the direction of

forward rotation cannot be changed without damaging the transmission. Note: for this reason, motion

in reverse is limited to a cumulative time of 5 minutes without offsetting forward motion.

2.3.4 Motor Coolant Connections

The motor coolant fitting location, hose size, and the inlet and outlet designation of the coolant fittings on the

motor are referenced on the ICD drawings. Also reference the ICD drawing for the volume of coolant contained

within the motor housing. The angular orientation of the coolant fittings can be changed by loosening the nut

on the coolant fitting, rotating it to the desired angle, and tightening the nut to the torque specification on the

ICD drawing. More details for making the coolant connections can be found in

The customer is responsible for ensuring the transmission fluid is installed and maintained (both levels and

changed per Eaton requirements).

The transmission will ship without fluid; therefore, the customer is responsible for filling the transmission before

any operation of the drive train system. The estimated amount of fluid is 4.6 liters.

2.4.1.1 Lubrication recommendations

Eaton recommends the use of Eaton SAE 50 PS-164 Transmission Fluid. This and Eaton approved alternatives can

be purchased from distributors listed at: www.roadranger.com.

In locations not covered by www.roadranger.com (e.g.: China) and where Eaton PS-164 is not available, BASF

2979 is the Eaton approved alternative. In the Chinese market, the BASF product is available from:

Dealer: 上海振威化工有限公司 (Shanghai Zhenwei Chemical Co., Ltd)

BC353060341319en-000101

Revision D

Classified as Business

Section

Table of Contents