Table of Contents
Advertisement
Installation and Operation Guide
ED-DT318B
Drive Train Systems with Traction Control, Inverter/Controller, and Motor with 2 Speed Transmission
Revision
Date
A
2018/12/19
B
2019/04/16
C
2019/12/07
D
2020/09/01
BC353060341319en-000101
Author
Information
Jesse C. Loggins
Initial Release
Jesse C. Loggins
Increased minimum air pressure to implement shift
Added note to Air Pressure Out Of Range to reflect the
minimum air pressure requirement
Added allowable tolerances on Max Sink and Max Source
Currents Added limits to 24 V power supply for proper
operation of the solenoid
Added notes to Upshift Failed and Downshift Failed stating
the updated logic
Added notes in
reverse operation in High gear
Added note to MCU CAN Active to reflect the observed
discrepancy
Ensured a consistent 10A Fuse requirement throughout the
Manual
Jesse C. Loggins
Decreased minimum air pressure requirement to implement
shift
Added Factory Diagnostic Message under TCU Status
Message 2
Jesse C. Loggins
Update to reflect change of ownership to Danfoss
Revision D
Classified as Business
Section
7.1,
7.2.1.6
and
7.3.6.1
© Danfoss | November 2020 | vii
to reflect
Advertisement
Table of Contents
Need help?
Do you have a question about the ED-DT318B and is the answer not in the manual?