Re-Enabling Printouts And Instrument Functions; Display Configuration Data - Rice Lake SCT-2200 Advanced Series Technical Manual

SCALES 1
PRIMARY LINE 1
PRIMARY LINE 2
PRIMARY LINE 3
PRIMARY LINE 4
SECONDARY LINE 1
SECONDARY LINE 2
SECONDARY LINE 3
SECONDARY LINE 4
GROSS 10.91 lb
TARE 0.091 lb
NET 10.000 lb
Primary 1
The sum of multiple primary instruments can be displayed or printed from the secondary instrument, if the number
of primary instruments is less than the number of primary instruments defined in . primary
instruments not in use must be turned off to use this functionality.

3.6.2 Re-Enabling Printouts and instrument Functions

If the error  displays when using the instrument, the print or function to be executed must be re-enabled.
Use the following procedure below to set re-enabling of functions:
1. Turn on the instrument and press
2. Press to enter the menu.
3. Press or until  displays. Press
to scroll through the options.
4. Press or
•  – prints when weight exceeds zero of the net weight
•  – prints while in motion
•  – prints regardless of condition
5. Press to confirm.
6. Slowly press multiple times until displays.
C
• Press to confirm and store to the instrument memory
• Press any other key to cancel and exit without saving
3.7

Display Configuration Data

The  function makes it possible to view the metric data and other configuration data, such as:.
• First range capacity, first range minimum weight, first range division
• Second range capacity, second range minimum weight, second range division (if set)
• Gravitational Acceleration Value
• Number of configured Channels
The minimum weight corresponds to 20 net weight divisions
Note
The data of the second range appears only if a range is configured
To view the configuration data:
1. Press and hold
C
2. Release . The capacity value of the first range displays.
C
SCALES
PRIMARY LINE 1
PRIMARY LINE 2
PRIMARY LINE 3
PRIMARY LINE 4
SECONDARY LINE 1
SECONDARY LINE 2
SECONDARY LINE 3
SECONDARY LINE 4
GROSS
TARE
NET
Figure 3-1. Printout Examples
while the firmware version displays.  displays.
until  displays.
2
10.91 lb
0.091 lb
10.000 lb
Primary 2
to enter the menu.
PRIMARY LINE 1
PRIMARY LINE 2
PRIMARY LINE 3
PRIMARY LINE 4
SCALES 1 10.00 lb
SCALES 2 10.00 lb
SUM 20.00 lb
Secondary
Operation 17