Cable Specifications And Pinouts For Ssr1200; Transceiver Support For Ssr1200 - Juniper SSR1200 Hardware Manual

Hide thumbs Also See for SSR1200:

Table of Contents

Table 10: Rack Requirements and Specifications

Rack Requirement

Rack connection to building structure

Cable Specifications and Pinouts for SSR1200

IN THIS SECTION

Transceiver Support for SSR1200

You can find information about the pluggable transceivers and connector types that are supported on

your Juniper Networks device by using the Hardware Compatibility Tool. The tool also documents the

optical and cable characteristics, where applicable, for each transceiver. You can search for transceivers

by product—and the tool displays all the transceivers supported on that device—or by category, interface

speed, or type. The list of supported transceivers for the SSR1200 is located at

apps.juniper.net/hct/product/.

CAUTION: If you face a problem running a Juniper Networks device that uses a third-

party optic or cable, the Juniper Networks Technical Assistance Center (JTAC) can help

you diagnose the source of the problem. Your JTAC engineer might recommend that

you check the third-party optic or cable and potentially replace it with an equivalent

Juniper Networks optic or cable that is qualified for the device.

(Continued)

Guidelines

•

Secure the rack to the building structure.

•

If earthquakes are a possibility in your geographical

area, secure the rack to the floor.

•

Secure the rack to the ceiling brackets and to wall

or floor brackets for maximum stability.

https:/ /

Table of Contents