General Site Installation Guidelines; Site Electrical Wiring Guidelines - Juniper SSR1200 Hardware Manual

Hide thumbs Also See for SSR1200:

Table of Contents

Rack Requirements for SSR1200 | 20

General Site Installation Guidelines

The following precautions help you plan an acceptable operating environment for your SSR1200

appliance and avoid environmentally caused equipment failures:

• Keep the area around the chassis free from dust.

• Follow prescribed airflow guidelines to ensure that the cooling system functions properly and that

exhaust from other equipment does not blow into the intake vents of the appliance.

• Follow the ESD procedures to avoid damaging equipment. Static discharge can cause components to

fail completely or intermittently over time.

• Install the appliance in a secure area, so that only authorized personnel can access the appliance.

Table 8 on page 18

describes the factors you must consider while planning the electrical wiring at your

site.

WARNING: You must provide a properly grounded and shielded environment and use

electrical surge-suppression devices.

Avertissement Vous devez établir un environnement protégé et convenablement mis à

la terre et utiliser des dispositifs de parasurtension.

Table of Contents