Table of Contents
Advertisement
• Locate the emergency power-off switch for the room in which you are working so that if an electrical
accident occurs, you can quickly turn off the power.
• Make sure that grounding surfaces are cleaned and brought to a bright finish before grounding
connections are made.
• Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
• Never assume that power is disconnected from a circuit. Always check the circuit before starting to
work.
• Carefully look for possible hazards in your work area, such as moist floors, ungrounded power
extension cords, and missing safety grounds.
• Operate the device within marked electrical ratings and product usage instructions.
• To ensure that the device and peripheral equipment function safely and correctly, use the cables and
connectors specified for the attached peripheral equipment, and make certain they are in good
condition.
You can remove and replace many device components without powering off or disconnecting power to
the device, as detailed elsewhere in the hardware documentation for this device. Never install
equipment that appears to be damaged.
SSR1200 Agency Approvals
The SSR1200 appliance complies with the following standards:
• Safety
• NRTL-UL60950-1 (Second Edition)
• C-UL to CAN/CSA 22.2 No.60950-1 (Second Edition)
• CB-IEC60950-1 (Second Edition with all country deviations)
• EN 60825-1 (Second Edition)
• IEC 62368-1 2nd Edition
• EMC
• FCC 47 CFR Part 15
• ICES-003 / ICES-GEN
75
Advertisement
Table of Contents
