Setup Of Scan List - Delta DVPDNET-SL Operation Manual

DeviceNet Network Scanner DVPDNET-SL
4.1.3

Setup of Scan List

Double click the existing icon of DVPDNET-SL in the DeviceNet Builder interface and then the following
dialog box appears for configuring the scan module.
Parameter
Available nodes
Scan list
Address
Node name
10
All already scanned slaves appear in "Available list".
After the configuration data is downloaded to DVPDNET-SL, the slave in
"Available nodes" will not conduct the real-time data exchange with
DVPDNET-SL.
After the configuration data is downloaded to DVPDNET-SL, the slave in
"Scan list" will conduct the real-time data exchange with DVPDNET-SL.
The station No. for the slave on the DeviceNet bus.
The node name that the node address corresponds to.
Explanation
DVP-PLC Operation Manual