Delta DVPDNET-SL Operation Manual page 42

DeviceNet Network Scanner DVPDNET-SL
3> Confirm all the settings and click on "OK". Next, download the configuration to DVPDNET-SL. If
DVP-SV is in RUN mode while you are downloading the configuration, a "Warning" dialog box will
appear.
4> Click on "OK" to continue the download. Make sure DVP-SV is in RUN mode.
Configure the DeviceNet network in the steps above. The mapping relation between

DVPDNET-SL and slave device is shown as below.
DVP28SV → DVPDNET-SL → slave device
DVP28SV ← DVPDNET-SL ←slave device
38
DVP28SV
D6287
D6288
DVP28SV
D6037
DVPDNET-SL
Control frequency of VFD-L
DVPDNET-SL
RTU-DNET & VFD-L
Control word of VFD-L
(2000H)
(2001H)
RTU-DNET & VFD-L
Output frequency of VFD-L
(2103H)
DVP-PLC Operation Manual