Input Table And Output Table - Delta DVPDNET-SL Operation Manual

4.1.4

Input Table and Output Table

Select the device in "Scan list" and then the data length of input and output of the device will be displayed
respectively in the lower part of the following dialog box.
Parameter
Output Table
Input Table
Register
Device image
DVP-PLC Operation Manual
DeviceNet Network Scanner DVPDNET-SL
PLC's registers and the corresponding output data are shown in "Output
table". The values in PLC's registers will be sent to slave in real time as the
control data of the slave.
PLC's registers and the corresponding input data are shown in "input table".
The data that slave sends to master will be updated in PLC's registers in real
time.
The number of the registers in PLC; "D6289_H" indicates the high byte of
register D6289; "D6289_L" indicates the low byte of register D6289.
For displaying the data type and the name of current slave; "Poll" means the
polled data.
Explanation
11