DeviceNet Network Scanner DVPDNET-SL
3 Installation
3.1
Connecting DVPDNET-SL to PLC
Adjust the extension clip on the left side of the PLC.
Meet the extension port of the PLC with DVPDNET-SL as shown in the figure below.
Fasten the extension clip.
3.2
Installing DVPDNET-SL and PLC on DIN Rail
Use 35mm DIN rail.
Open the DIN rail clip on the PLC and DVPDNET-SL. Insert the PLC and DVPDNET-SL onto the DIN
rail.
Clip up the DIN rail clips on the PLC and DVPDNET-SL to fix the PLC and DVPDNET-SL on the DIN rail,
as shown below.
6
DVPDNET
DVP28SV
RUN
STOP
DVPDNET
DVP28SV
RUN
STOP
35mm DIN rail
DVP-PLC Operation Manual