Table of Contents
Advertisement
2)
Configuration of DeviceNet Master
1>
Double click on DNET Scanner (node 01), and the "Scan Module Configuration..." dialog box will
pop up. You can find the currently available nodes, RTU-DNET and VFD-B Drives 230V 3HP, in
the list on the left side. On the right side, there is an empty "Scan List".
2>
Move the DeviceNet slave devices in the "Available Nodes" list on the left side to the "Scan List" on
the right side. Select one node and click on
DVP-PLC Operation Manual
DeviceNet Network Scanner DVPDNET-SL
>
. In this way, move all the nodes to the scan list.
37
Advertisement
Table of Contents
