Delta DVPDNET-SL Operation Manual page 34

DeviceNet Network Scanner DVPDNET-SL
3) Set up the communication parameters for the PC and DVP-SV, e.g. the communication port, address, baud
rate and communication format. Click on "OK" after the configuration is finished.
Item
COM Port
Address
Baud rate
Data Bits
Parity
Stop Bit
Mode
4) Select "Network" => "Online" and the "Select Communication Channel" dialog box will appear. Click on "OK"
to start scanning the entire DeviceNet network.
5) After scanning is successful, right click DNET (Slave) to select "Parameter editing".
30
Function
COM port on the PC to be used to communicate
with DVP-SV
Communication address of DVP-SV
Communication speed between the PC and
DVP-SV
Communication protocol between the PC and
DVP-SV
Communication mode between the PC and
DVP-SV
Default
COM1
1
9,600 (bps)
7
Even Parity
1
ASCII
DVP-PLC Operation Manual