Delta DVPDNET-SL Operation Manual page 38

DeviceNet Network Scanner DVPDNET-SL
3> Select "Network" => "Online", and the "Select Communication Channel" dialog box will appear. Click
on "OK" to start scanning the DeviceNet network.
4> If there is no progress in the bar on the dialog box, it means the connection between the PC and
DVP-SV is abnormal, or there are other programs also using the COM port on the PC. After the scan
is completed, the dialog box will tell you that the scan is completed, and the icons and device names
of all the nodes scanned on the network will be shown on the screen. See the figure below, in which
the node addresses of DVPDNET-SL and
34
RTU-DNET are
01 and 02 respectively.
DVP-PLC Operation Manual