Delta DVPDNET-SL Operation Manual page 32

DeviceNet Network Scanner DVPDNET-SL
5) Select "Network" => "Setup of scan module" and the following "Setup of scan module" dialog box appears.
Select "Master mode" and "Startup" to activate the function of extended baud rate. In the meanwhile, select
the appropriate baud rate according to the actual demand. Click "OK" to finish setting.
6) Select "Network" => "Download" and the following dialog box appears. Click "OK" to download the
configuration data to DVPDNET-SL.
7) After download is completed, set DVPDNET-SL's function switch DR0 and DR1 as ON and then repower
PLC to finish the setting of the extended baud rate.
28 DVP-PLC Operation Manual