Input And Output Mapping Areas; Data Mapping Areas - Delta DVPDNET-SL Operation Manual

DeviceNet Network Scanner DVPDNET-SL
4.2

Input and Output Mapping Areas

4.2.1

Data Mapping Areas

The input and output data mapping introduced here is the data mapping between the PLC and DVPDNET-SL.
The mapping relation keeps unchanged and users are not allowed to revise the areas.
Max 8 units of DVPDNET-SL modules can be connected on PLC's left side. After all DVPDNET-SL modules
are connected to the PLC, the PLC will assign data mapping areas to each DVPDNET-SL.
DVPDNET DVPDNET
When DVPDNET-SL is used with different PLC, the input and output mapping areas for it are

different. The details are as follows:
When the PLC is DVP-SV, DVP-EH2_L, DVP-SX2, DVP-SA2 or DVP10MC11T, registers

D6000~D9999 are occupied. The number of the first DVPDNET-SL on the left side of the
PLC is 1 and the number of the DVPDNET-SL module close to the left side of the first
DVPDNET-SL is 2, and
When the PLC is DVP-SV3 and DVP-SX3, registers D16000~D19999 are occupied. The

number of the first DVPDNET-SL on the left side of the PLC is 1 and the number of the
DVPDNET-SL module close to the left side of the first DVPDNET-SL is 2,
DVPDNET-SL modules are No. 3, No. 4
12
DVPDNET DVPDNET
subsequent DVPDNET-SL modules are No. 3, No. 4
Unit No
Output mapping
1 D6250 ~ D6497
2 D6750 ~ D6997
3 D7250 ~ D7497
4 D7750 ~ D7997
5 D8250 ~ D8497
6 D8750 ~ D8997
7 D9250 ~ D9497
8 D9750 ~ D9997
Unit No
Output mapping
1 D16250 – D16497
2 D16750 – D16997
3 D17250 – D17497
4 D17750 – D17997
5 D18250 – D18497
DVPDNET DVPDNET DVPDNET
Mapping devices
and so on.
Mapping devices
DVPDNET DVP28SV
RUN
STOP
and so on.
Input mapping
D6000 ~ D6247
D6500 ~ D6747
D7000 ~ D7247
D7500 ~ D7747
D8000 ~ D8247
D8500 ~ D8747
D9000 ~ D9247
D9500 ~ D9747
Input mapping
D16000 – D16247
D16500 – D16747
D17000 – D17247
D17500 – D17747
D18000 – D18247
DVP-PLC Operation Manual
and subsequent