Ignition Sensing; Ignition Sensing Installation - peplink PEPWAVE HD Dome Pro User Manual

For more information, please visit peplink.com

Hide thumbs Also See for PEPWAVE HD Dome Pro:

Table of Contents

24.7 Ignition Sensing

Ignition Sensing detects the ignition signal status of a vehicle it is installed in.

This feature allows the cellular router to start up or shut down when the engine of that vehicle is

started or turned off.

The time delay setting between ignition off and power down of the router is a configurable

setting, which allows the router to stay on for a period of time after the engine of a vehicle is

* Currently not functional; will be used for additional features in future firmware.

** Connecting IGN I/P is optional and is needed only if the Ignition Sensing feature is

https://www.peplink.com

connected to positive feed on the ignition **

connected to permanent negative feed (ground)

connected to permanent positive feed (power)