Enter the WAN router's IP address in this field. If there are more hosts in addition to the
WAN Default
router on the WAN segment, click the
Gateway
the I h ave other host(s) on WAN segment box and enter the IP address of the hosts that
need to access LAN devices or be accessed by others.
WAN DNS
Enter the selected WAN's corresponding DNS server IP addresses.
Servers
A
A dvanced feature, please click the
12.2.3 Port Settings
To configure port settings, navigate to N etwork > Port Settings
This section allows you to:
●
enable or disable specific LAN ports
●
Configure the negotiation speed of the LAN ports
●
Configure the port type (Trunk or Access)
●
Assign a VLAN to a LAN port (in Access mode)
https://www.peplink.com
button next to "WAN Default Gateway" and check
button on the top righthand corner to activate.
81
Copyright @ 2019 Peplink