Shut-Down Procedure - JLG 642 Operation & Safety Manual

Shut-Down Procedure

When parking the telehandler, park in a safe location on flat level ground and away from
other equipment and/or traffic lanes.
1. Apply park brake.
2. Shift transmission to "Neutral".
3. Lower forks or attachment to ground.
4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.
5. Shut off engine and remove ignition key.
6. Exit telehandler properly.
7. Purge indicator (4) will illuminate until DEF is purged from the system. Do not turn
key (5) to off while indicator is illuminated.
8. Turn off electrical master switch.
9. Block wheels (if necessary).
31211031
5
4
Section 4—Operation
OD1730
4-5