JLG 642 Operation & Safety Manual page 115

Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
CRUSH HAZARD. Always level forks (horizontally) and telehandler frame before
swinging load to side. Swinging unlevel forks could cause load to slide off forks.
CRUSH HAZARD. Do not use swing carriage to push or pull objects or load. Failure to
comply could cause object or load to fall.
CRUSH HAZARD. Use retaining pin (if equipped) for locking swing frame to fixed
frame when carrying loads greater than 5000 lb (2268 kg). Failure to comply could
cause object or load to fall.
Operation:
• To drive with a load, keep forks pointed forward and travel in accordance with
requirements set forth in Section 1—General Safety Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could damage forks
or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
31211031
WARNING
WARNING
WARNING
Section 5—Attachments
5-21