Dual Fork Positioning Carriage - JLG 642 Operation & Safety Manual

Section 5—Attachments

Dual Fork Positioning Carriage

OZ3670
2
OD0370
Joystick (1) controls movement of the boom
Roller switch (2) controls carriage tilt.
• Press roller switch down to tilt up.
• Press roller switch up to tilt down.
To Fork Position:
Roller switch (3) controls fork position.
• Press roller switch down to shift forks in.
• Press roller switch up to shift forks out.
5-22
Use Dual Fork Positioning Carriage Capacity Chart
To determine maximum capacity, refer to "Telehandler/Attachment/
Fork Capacity" on page 5-4.
1
OD0390
OD0880
3
OD0420
31211031