Material Handling Arm - JLG 642 Operation & Safety Manual

Section 5—Attachments

Material Handling Arm

OH5670
Suspend loads in accordance with requirements set forth in Section 1—General
Safety Practices.
Joystick (1) controls movement of the boom.
Roller switch (2) controls material handling arm tilt.
• Press roller switch down to tilt up.
• Press roller switch up to tilt down.
5-46
Use Appropriate Material Handling Arm Attachment Capacity Chart
To determine maximum capacity, refer to "Telehandler/Attachment/
Fork Capacity" on page 5-4.
2
OD1660
1
OD0870
OD0390
31211031