Seat Belt - JLG 642 Operation & Safety Manual

Section 3—Controls and Indicators

Seat Belt

Fasten seat belt as follows:
1. Grasp both free ends of the belt making certain that belt webbing is not twisted or
entangled.
2. With back straight in the seat, couple the retractable end (male end) of the belt into
the receptacle (buckle) end of the belt.
3. With belt buckle positioned as low on the body as possible, pull the retractable end
of the belt away from the buckle until it is tight across the lap.
4. To release belt latch, press red button on the buckle and pull free end from buckle.
3-28
OH20912
31211031