Windshield Washer System (If Equipped) - JLG 642 Operation & Safety Manual

Section 7—Lubrication and Maintenance

Windshield Washer System (if equipped)

A. Windshield Washer Fluid Level Check
1. Perform "Shut-Down Procedure" on page 4-5.
2. Remove reservoir cap (3).
3. Windshield washer fluid should be visible in the reservoir.
4. If washer fluid level is low, add fluid as needed.
5. Replace reservoir cap.
7-30
50
OW0980
OAL2040
3
OD0820
31211031