Other Publications Available; Machine Configuration - JLG 642 Operation & Safety Manual

Read This First

Other Publications Available

Service Manual.............................................................................................................................31211033
642, 943 & 1043 Parts Manual.................................................................................................31211111
1055 & 1255 Parts Manual........................................................................................................31211032
Note: The following standards may be referenced in this manual:
ANSI is compliant to ANSI/ITSDF B56.6
AUS is compliant to AS 1418.19
CE is compliant to EN1459
Refer to the machine Serial Number Plate to identify the applicable compliance standard.

Machine Configuration

Two configurations of each machine are included in this manual. Determine if machine is
equipped with Ultra Low Sulfur Fuel Decal as indicated below.
• If equipped with Ultra Low Sulfur decal, all specific references to this machine
configuration will be referred to as Ultra Low Sulfur (ULS) from this point forward.
• If not equipped with Ultra Low Sulfur decal, all specific references to this machine
configuration will be referred to as Low Sulfur (LS) from this point forward.
d
ULTRA LOW
SULFUR DIESEL
FUEL ONLY
S < 15 mg/kg
1001125387 A
OD0840
31211031