Engine Oil - JLG 642 Operation & Safety Manual

Engine Oil

A. Engine Oil Level Check
3
1. Perform "Shut-Down Procedure" on page 4-5.
2. Open engine cover.
3. Remove dipstick (3) and check oil mark. Oil should be between full (4) and add (5)
marks of dipstick.
4. Replace dipstick.
5. If oil is low, remove oil fill cap (6) and add oil to bring oil up to full mark in
crosshatch area.
6. Replace oil fill cap.
7. Close and secure engine cover.
31211031
Section 7—Lubrication and Maintenance
6
OD0740
10
OW0970
4
5
OW1020
O 0751 D
7-21